Installation Using The Screw Holes On The Side Of The Navigation Unit - Pioneer AVIC-F320BT Installationsanleitung

Section
04 Installation
Installation using the screw holes
on the side of the navigation unit
1 Remove the side brackets.
2 Fastening the navigation unit to the
factory radio-mounting bracket.
Position the navigation unit so that its screw
holes are aligned with the screw holes of the
bracket, and tighten the screws at 3 or 4 loca-
tions on each side.
Use the screws (5 mm × 8 mm) (sold sepa-
rately), depending on the shape of the brack-
et's screw holes.
18
Engb
Side bracket
Screw for fixing the side bracket
(5 mm  6 mm)
Factory radio mounting bracket
Screw
(5 mm × 8 mm)
(sold separately)
If the pawl gets in
the way, bend it down
Dashboard or console