Parts Supplied; Installation Using The Screw Holes On The Side Of The Navigation Unit - Pioneer AVIC-F310BT Installationsanleitung

Section
Installation
04

Parts supplied

The navigation unit
Flush surface screw
(5 mm × 8 mm)
(8 pcs.)
p *For in-store display use only
16
Engb
All manuals and user guides at all-guides.com
Binding screw
(5 mm × 8 mm)
(8 pcs.)
Screw*
(2 mm × 8 mm)
Installation using the screw holes
on the side of the navigation unit
% Fastening the navigation unit to the
factory radio-mounting bracket.
Position the navigation unit so that its screw
holes are aligned with the screw holes of the
bracket, and tighten the screws at 3 or 4 loca-
tions on each side.
Use either the binding screws (5 mm × 8 mm)
or flush surface screws (5 mm × 8 mm), de-
pending on the shape of the bracket's screw
holes.
Factory radio mounting bracket
Binding screw or
flush surface screw
Be sure to use the
screws supplied
with this navigation
system.
If the pawl gets in the
way, bend it down
Dashboard or console