Philips Senseo HD7854/60 Bedienungsanleitung Seite 14

ENGLISH
14
3 Press the milk container lid release lever (1), tilt the milk container
lid slightly (2) and pull the milk container lid upwards to remove it
from the milk container (3).
4 Fill the milk container with cold milk straight from the refrigerator
(5-8°C) up to the level required for the coffee variety.
Note: The amount of milk added to the coffee may vary due to variations in
milk temperature or type of milk. It may also depend on how clean the milk
container unit is.
5 Fasten the milk container lid onto the milk container ('click').
Always check if the lid is fixed properly onto the milk container to
prevent spillage when you place the milk container unit in the machine.
6 Slide the milk container unit into the coffee machine (1) and push
down the milk container lever ('click') (2).
Note: Push down the milk container lever as far as possible ('click') to make
sure that the milk container unit is placed properly in the machine. You only
obtain properly frothed milk if the milk container unit is placed properly.
Adjusting the cup tray height
1 Place one or two cups under the coffee spout.
Tip: Do not use cups that are too large as they cause the coffee to get cold
more quickly.
2 To minimise splattering, turn the knob to adjust the height of the cup
tray so that the top of your cup is just under the spout.