Getting Started; Connecting The Transmitter Cradle - Silvercrest RFH 2401 Bedienungsanleitung

Getting Started

Connecting the Transmitter Cradle

To connect to hi-fi equipment, use one of the supplied audio cables (see
page 7 - Package Contents).
1. Connect one end of the audio cable to the audio input socket (13).
2. Connect the other end of the cable to the headphones output socket of
your hi-fi equipment.
If your hi-fi equipment has a 6.3 mm jack socket, connect the adapter
plug (see page 7 - Package Contents) to the audio cable.
You may also connect the adapter cable (see page 7 – Package
Contents) to the cable to use the Cinch audio outputs of your hi-fi
equipment.
3. Plug the small plug at the cable end of the mains adapter into the power
socket (12).
4. Plug the power adapter into a wall outlet.
5. Turn on the transmitter cradle. See page 14 - Powering the Transmitter
Cradle On/Off.
12
SilverCrest RFH 2401
English