Operation; Technical Data - VOLTCRAFT DL-141TH Bedienungsanleitung

Summary of features:
User Management
Email Management
General Settings
Language Preference
Email Template
Device Management (Add / Remove)
Custom Graph
Email Alert
Web Interface

OPERATION

Before operation, please install the software CD as some functions are only available
using the software program.
a) Temperature/humidity mode
1. Press the button "Temp. / %RH" to switch between temperature and humidity display
mode.
2. It will be shown in the lower part of the LCD in a sequence: Temperature (ºC) → Humidity.
You can select the temperature to be displayed in ºF (Fahrenheit) by using the software.
In doing so, refer to the information in the software instructions.
There will be the icon "-LO-" displayed if the temperature/humidity sensor is not well
connected. At this time, please open the back cover and re-install the sensor, until the
correct measurement value is displayed.
b) Display mAX/mIN values
Press the button "MAX/MIN" to hold the maximum/minimum measurement and show the
recorded values.
It will be shown in the lower part of the LCD in a sequence: Maximum value → Minimum
value
Time and date display of the maximum/minimum values is switching automatically every
10 seconds. If you do not press the button for 40 seconds, the meter will automatically
exit from MAX/MIN mode and return to the the data hold and measure mode.
c) Alarm function
When the measured value exceeds the set upper limit or lower limit, the alarm LED will light
up one time per minute. A red LED shows that the temperature value exceeds the limit, while a
yellow LED shows that the humidity value exceeds the limit.
DISPOSAL
a) Product
Electronic devices are recyclable waste and must not be disposed of in the household
waste.
At the end of its service life, dispose of the product according to the relevant statutory
regulations.
Remove any inserted (rechargeable) batteries and dispose of them separately from
the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with this symbol to indicate that
disposal in the domestic waste is forbidden. The designations for the heavy metals
involved are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on (rechargeable)
batteries, e.g. below the trash icon on the left).
Used (rechargeable) batteries can be returned to collection points in your municipality,
our stores or wherever (rechargeable) batteries are sold.
You thus fulfil your statutory obligations and contribute to the protection of the environment.

TEcHNIcAL DATA

Operating voltage:
Relative humidity accuracy:
Temperature accuracy:
Resolution:
Memory:
Measuring rate:
System requirements:
Dimensions (L x W x H):
Weight:
Standard
√
√
√
1 x 3.6 V Lithium battery
±5 % (for 0 – 20 %)
±3.5 % (for 20 – 40% / 60 – 80 %)
±3 % (for 40 – 60 %)
±2 °C (for -40 to -10 °C / +40 to +70 °C)
±1 °C (for -10 to +40 °C)
0.1 % (relative humidity) / 0.1 °C (temperature)
32700
1 second to 24 hours
Microsoft Windows® 2000 / XP / Vista™ / 7
94 x 48 x 33 mm
115 g
Professional
√
√
√
√
√
√
√
√
√
Legal notice
These operating instructions are a publication by Voltcraft®, Lindenweg 15, D-92242 Hirschau/Germany, Phone +49 180/586 582 7
(www.voltcraft.de).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing
systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© copyright 2012 by Voltcraft® V2_0212_02-JU