Pulse Output Function Module - SCYLAR INT8 Installationsanleitung

English

6.4 Pulse output function module

The module contains connections for 2 pulse outputs, which can
be programmed as desired using the IZAR@SET software. The
pulse outputs are marked as standard as "O1 - | _ " and "O2 - | _ " on
the terminal strip and Out1 respectively Out2 in the display.
· External supply: V
· Output current < _ 20mA with a
residual voltage of < _ 0.5 V
· Open collector (drain)
· Floating
· Output 1: Frequency < _ 4 Hz
Pulse width 100-150ms
Pulse duration 125 ms ±10 %
Pulse break: > _ 125 ms -10 %
· Output 2: Frequency < _ 100Hz
Ratio: pulse duration/pulse break ~1:1
· Pulse value programmable as desired
Default: last digit in display:
= 3-30V DC
cc
Energy external
meter
Pulse
output
module
V
cc
Pulse
GND