SCYLAR INT8 Installationsanleitung Seite 21

Insert only one O-ring in the sensor hole using the mounting pin
supplied. The second O-ring is spare. Only tighten the brass or
plastic screw by hand (2-3 Nm); tighten the plug screw with a
torque of approx. 12 Nm.
1 2
4. FLOW SENSOR PULSE IMPULSE
Connection of flow sensor with pulse input and if required with
voltage supply on clamp 9 (+Vcc), 10 (Flow Pulse), 11 (- Gnd) of
calculator SCYLAR INT 8.
Volume Sensor connection
V cc external 3,6 V
Flow pulse input (open collector)
Ground
3 4
SCYLAR INT 8
9 (+)
10
11 (-)
English
5.1 5.2 6