Notes On The Ce Symbol - Siemens SIMATIC S5 Betriebsanleitung

Technical Description
1.6

Notes on the CE Symbol

The following applies to the SIMATIC product described in this manual:
EMC Directive
This product fulfils the requirements for the EC directive 89/336/EEC on
"electromagnetic compatibility" and the following fields of application
apply according to this CE symbol:
Field of Application
Industry
Low Voltage This product fulfils the requirements for the EC directive 73/23/EEC on
Directive "low voltage" and was tested to EN60950.
Declaration of The EC declarations of conformity and the documentation relating to this
Conformity are available to the authorities concerned, according to the above EC
directive, Article 10 (1), from:
Siemens Aktiengesellschaft
Bereich Automatisierungs- und Antriebstechnik
Geschaeftsbereich Industrie-Automatisierungssysteme
Postfach 4848
D-90327 Nuernberg
Products which are not marked with the CE Symbol fulfill the
requirements and standards specified in the "Technical Data" section.
Observing the The setup guidelines and notes on safety given in the manual must be
Setup observed on startup and during operation.
Guidelines
1-6
Requirement for
Emitted Interference Noise Immunity
EN 50081-2: 1993 EN 50082-2: 1995
C79000-G8576-C471-04
SIMATIC S5