Herunterladen Inhalt Inhalt Diese Seite drucken

Tunze Osmolator 3155 Gebrauchsanleitung Seite 27

Vorschau ausblenden Andere Handbücher für Osmolator 3155:
Inhaltsverzeichnis

Werbung

Using universal holder for attachment
to horizontal aquarium pane
Optional; for glass panes up to 19 mm (.74 in.) with
article No. 3155.250
(1) Premount the holding clamp.
(2) Use the retaining screw to set the glass thickness
(max. 19 mm (.74)).
(3) Tighten the clamping screws.
(4) Premount the retaining rail with the sliding part for
the safety sensor (5), and set the requested position
of the sensor in the process.
(6) Premount the retaining rail with the sliding part
for the operating sensor (5), and set the requested
position of the sensor in the process.
(7) Loosely fit the screw and nut on the retaining rail,
suspend in holding clamp (1), and screw down.
Insert the operating sensor (cable upwards) and the
safety sensor (cable to the bottom) into the sensor
holder, subsequently lift up to stop and lock by
turning.
Up to 39 mm (1.5 in.)
(8) For glass panes up to a thickness of 39 mm
(1.5 in.), two longer M5 x 60 mm (2.3 in.) stainless
steel screws, article No. 3000.244, are required in
addition.
Fixation sur renfort horizontal
avec support universel
En option, jusqu'à 19mm avec art. 3155.250
(1) Procédez à un premier assemblage du support.
(2)
Ajustez l'ensemble de serrage du support
à l'épaisseur du verre (maxi 19mm) par la vis de
réglage.
(3) Serrez la vis de serrage.
(4) Assemblez la barre de montage et la pièce
coulissante pour le capteur de sécurité (5),
choisissez la bonne position du capteur.
(6) Assemblez la barre de montage et la pièce
coulissante pour le capteur de régulation, choisissez
la bonne position du capteur.
(7) Insérez la vis dans la barre de montage et fixez
le tout au support (1) à l'aide de l'écrou.
Insérez le capteur de régulation (sortie de câble vers
le haut) et le capteur de sécurité (sortie de câble vers
le bas) dans leurs supports respectifs. Positionnez
les capteurs jusqu'à butée puis verrouillez par une
rotation.
Jusqu'à 39mm
(8)
Vis
longues
pour
d'épaisseur : art. 3000.244 comprenant 2 vis M5 X
60mm en acier V4A.
vitres
jusqu'à
39mm
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis