Hengstler Signo 721.2 Benutzerhandbuch Seite 151

8 Automatic reset
9 Reset / Set
Potentiometer
Signal time out 2 setting to
0,05 - 1s or bistable
6 Replacing the 0721.1 with 0721.2, .3 or .4
F5 The setting of both switches are replaced by the set-
tingof F5
F7 and F8 With F7 and F8 a monostabil or bistabile output signal
Signal times can be selected.If a monostabil signal is selected (see
see chapter 4.3 chapter 2.3) the signal times have to be set between
0,01 to 599,99.
151