Changes On The Switch- And Potentiometer Settings - Hengstler Signo 721.2 Benutzerhandbuch

6 Replacing the 0721.1 with 0721.2, .3 or .4
6.3 Changes on switch- and potentiometersettings
Switches Function 0721.1xx
1 Input npn - pnp
2 Gate at application input
3 Hold at the application
input
4 Damping 5 kHz / 30 Hz
5 Lock keyboard reset
6 Keyboard lock Key 1
7 Keyboard lock Key 2
Functions codes Comment
see chapter 5.3
F3
F1 = 0, 3, 5, Gate is available at Input B,C or application input.
oder Function codes F1 or F20 have to be programmed cor-
F20 = 3 respondingly.
F1 = 2 oder Hold is available at Input B or application input. Func-
F20 = 5 tion codes F1 or F20 have to be programmed corres-
pondingly.
F4 new 60 kHz / 30 Hz (see techn. data chapter 7)
Auswahl mit With the function codes F30-F35 reset, presets, presca-
F30-F35 ler and correction values can be locked seperately. With
F36 it is programmed wether the locking is total or
F36 = Sperrmo-
corresponding to the aplication input.
dus
150