Buttons And Functions; Operation - Topcom axo 300 Bedienungsanleitung

Axo 300

2. BUTTONS AND FUNCTIONS

1. Microphone
2. Receiver
3. Hook switch
4. Display
5. Timer button
6. Clock button
7. Hour button
8. Minute button
9. Numerical buttons
10. Store button
11. Memory button
12. R-button (flash)
13. Mute button
14. Speaker button (handsfree)
15. Line indicator
16. M1 Direct memory
17. M2 Direct memory
18. M3 Direct memory
19. M4 Direct memory
20. M5 Direct memory
21. M6 Direct memory
22. Redial/Pause button
23. Temporary memory button
24. PROG ON/OFF switch
25. AGC ON/OFF switch
26. Ring volume switch
27. Connection telephone line
28. Speaker volume switch
29. Index card
30. Connection coil cord handset
31. Cover of battery compartment
14
Axo 300
3. CONNECTION
1. Connect the telephone cord of the handset to the telephone base.
2. This telephone needs 2 AA-batteries (preferably alkaline) for the display. Put
these batteries in the battery compartment.
3. Connect the power cable plug to the power socket.

4. OPERATION

4.1. SETTING THE RING VOLUME
The ring volume can be set by means of the ring volume switch. You have
three possibilities : LOW – MEDIUM – HIGH.
4.2. SETTING THE RECEIVER VOLUME
The volume of the speaker can be set by means of the speaker volume switch.
When you set the volume of the speaker, the volume of the handset will not be
adjusted at the same time.
4.3. MEMORIES
The AXO 300 has 6 one-button memories (M1-M6) en 10 two-button memories
(0-9) to programm telephone numbers.
PROGRAMMATION OF A INDIRECT MEMORY (0-9)
1 Put the PROG ON/OFF switch on position ON.
2. Press the speaker button or pick up the receiver.
3. Press the Set button.
4. Dial the telephone number (max. 16 digits).
5. Press the memory button first, followed by the number of your choice
(0-9).
6. Put down the receiver or press de speaker button again.
7. Put the PROG ON/OFF switch on position OFF .
8. Note down the information on the index card.
PROGRAMMATION OF AN DIRECT MEMORY (M1-M6)
1. Put the PROG ON/OFF switch on position ON.
2. Press the speaker button or pick up the receiver.
15