Battery Replacement - Unitest Hexagon 310 Bedienungsanleitung

8.3 Batterie replacement
Prior to storage battery repla-
cement, disconnect the instru-
ment from any connected test
leads.
Only use batteries as descri-
bed in the technical data sec-
tion!
Please consider your environ-
Z
ment when you dispose of
your one-way batteries or
accumulators. They belong in
a rubbish dump for hazardous
waste. In most cases, the bat-
teries can be returned to their
point of sale.
Please, comply with the res-
pective valid regulation regar-
ding the return, recycling and
disposal of used batteries and
accumulators.
If an instrument is not used
over an extended time period,
the batteries must be remo-
ved. Should the instrument be
contaminated by leaking bat-
tery cells, the instrument has
to be returned for cleaning
and inspection to the factory.
Batterie replacement
c Switch of the instrument.
c Loosen the screws on the instru-
ment rear.
c Lift the case cover.
c Remove the discharged batterie.
c Insert new batterie.
c Replace the case cover and
retighten the screws.
Batterie: 1 x 9 V, IEC 6LR61
69