Replacement Of Batteries - Unitest Hexagon 55 Bedienungsanleitung

6.3 Replacement of Batteries

Prior to storage battery replacement, disconnect the instrument from
any connected test leads.
Only use batteries as described in the technical data section!
Switch of the instrument.
Loosen the screws on the instrument rear. Lift the case cover.
Remove the discharged batterie.
Insert new batterie.
Replace the case cover and retighten the screws.
Please consider your environment when you dispose of your one-way
batteries or accumulators. They belong in a rubbish dump for hazar-
dous waste. In most cases, the batteries can be returned to their point
of sale.
Please, comply with the respective valid regulation regarding the re-
turn, recycling and disposal of used batteries and accumulators.
If an instrument is not used over an extended time period, the accumu-
lators or batteries must be removed. Should the instrument be conta-
minated by leaking battery cells, the instrument has to be returned for
cleaning and inspection to the factory.
41