User Interface / Controls - Pinnacle MovieBox DV Kurzanleitung

The following illustrations shows a sample configuration with the
MovieBox DV in combination with a PC.
Analog
Video Source
Video Source
* Special case: The digital camera can also be used as a target when data are downloaded
U I
SER NTERFACE
LEDs
Your MovieBox DV has one green LED for each video source (S video,
Composite video, DV Port A, DV Port B). The two LEDs used for the DV
ports are both enabled if the DV mode is selected as input via the source
select button. The two LEDs are both „off" if S-video or Composite video
are used as input. Make sure that the Power LED is „on" when you start
working with the MovieBox DV.
6
MovieBox DV
Analog
In
DV Port A*
PC
Digital
from the PC. If, on the other hand, the data come from an analogue input source, you
will not have this option.
/ C
ONTROLS
Power
Supply
Analog
Out
DV Port B
VCR
Analog
Out
Video Monitor