Mounting accessories
pos.
A
B
C
D
E
Installation Instructions
This microwave oven must be installed in a tall cupboard. Please note
the following instructions:
•
Remove everything that is fragile from the adjacent cupboards.
•
For the installation, the cupboard must meet the following condi-
tions:
•
The cupboard must not have any cracks, splinters or other
damages. All joints must be stable.
•
The cupboard must be designed to support at least 40 kg.
•
The microwave oven must be installed at a height of at least 85
cm.
•
The rear wall of the cupboard must be removed to allow suf-
ficient ventilation of the microwave oven.
•
The side walls of the cupboard must be at least 19 mm thick.
•
The installation depth of the cupboard has to be at least
550 mm.
•
It is important that there is a power socket within reach of the de-
vice's power cable.
•
The power socket must be easily accessible so that the plug can be
quickly removed in case of an emergency.
•
Important! Do not plug in the device until the installation has been
completed!
•
Further information and instructions can be found on the drilling
template provided.
WARNING:
•
Adhere to the dimensions given in the instructions.
•
Only use the included installation accessories.
•
Screws which are screwed in too deeply (or are too long) can
damage the device or represent a potentially fatal safety hazard.
piece
Number
Mounting frame
1
Screw ,long
1
Drilling template
1
Screws ,short
2
Mounting Bracket
1
Dimensions of the Cupboard
Prepare a built-in cupboard /niche according to the following dimen-
sional drawing Diagram 1.
1
Installation (Steps. 2 to 4)
2
•
Position the drilling template in the cabinet.
Follow the instructions on the drilling template.
•
Trace the drilling holes for the mounting
bracket.
•
Use the 2 short screws to attach the mounting
bracket.
3
Sectional drawing of the mounting bracket's
position
19