Avoiding Fire Hazards With Built-In Appliances; Mounting Accessories; Installation Instructions - BOMANN MWG 2216 H EB Bedienungsanleitung

START/+30Sec./CONFIRM
○ Starting the function
○ Quick start of the microwave (always
+30 seconds at 100% power)
○ Prolonging the cooking time by 30 sec-
onds during operation (except when
defrosting or using auto function)
○ Confirming a setting
TIMER●WEIGHT●AUTO MENU
Turning knob for setting the clock, cooking
time, temperature, combi modes, auto
functions or weight settings

Avoiding Fire Hazards with Built-in Appliances

Always observe the instructions contained in the section "Installa-
tion Instructions".
• Do not remove the feet on the bottom of the device.
• Only use the provided installation materials when mounting your
device.
• When installing the microwave oven, please adhere to the
dimensions shown in drawing 1.
• The rear wall of the cupboard must be removed!
• There is a ventilation slot at the bottom of the mounting frame.
Keep it clear at all times.

Mounting accessories

Pos.
A
B
C
G
H
I
J
Piece Number
Adjusting screw 1
Mounting frame 1
Screw, long 1
Drilling template 1
Screws, short 10
Traverses 2
Mounting Bracket 1

Installation Instructions

This microwave oven must be installed in a tall cupboard. Please
note the following instructions:
• Remove everything that is fragile from the adjacent cupboards.
• For the installation, the cupboard must meet the following condi-
tions:
- The cupboard must not have any cracks, splinters or other
damages. All joints must be stable.
- The cupboard must be designed to support at least 40 kg.
- The microwave oven must be installed at a height of at least
85 cm.
- The rear wall of the cupboard must be removed to allow suf-
ficient ventilation of the microwave oven.
- The side walls of the cupboard must be at least 19 mm thick.
- The installation depth of the cupboard has to be at least
550 mm.
• It is important that there is a power socket within reach of the
device's power cable.
• The power socket must be easily accessible so that the plug can
be quickly removed in case of an emergency.
• Important! Do not plug in the device until the installation has
been completed!
• Further information and instructions can be found on the drilling
template provided.
Warning:
Adhere to the dimensions given in the instructions.
►
Only use the included installation accessories.
►
Screws which are screwed in too deeply (or are too long)
►
can damage the device or represent a potentially fatal
safety hazard.
Dimensions of the Cupboard
• Prepare a built-in cupboard /niche according to the following
dimensional drawing Diagram 1.
• Diagram 2 provides an overview of all accessories.
1 2
19