Using The Control Panel - Dell 3400MP Betriebsanleitung

Using the Control Panel

1
Power
2
Source
3
Keystone adjustment
4
Resync
5
Menu
Turn the projector on and off. For more
information, see "Turning Your Projector On" on
page 11 and "Turning Your Projector Off" on
page 11.
Press to toggle through Analog RGB, Composite,
Component-i, S-video, and Analog YPbPr sources
when multiple sources are connected to the
projector.
Press to adjust image distortion caused by tilting
the projector. (±16 degrees)
Press to synchronize the projector to the input
source. Resync does not operate if the on-screen
display (OSD) is displayed.
Press to activate the OSD. Use the directional
keys and Menu button to navigate through the
OSD.
Using Your Projector 15