Omnitronic TMC-02 Bedienungsanleitung Seite 31

9 Button
To start playback and for stutter effects.
10 Button
To switch to pause and to jump to cue points.
11 Button CUE
• For return to the beginning of the title or a cue point
defined before (the unit is in pause mode).
• When keeping the button pressed in pause mode, the
title is momentarily played. As soon as you release the
button the unit instantly returns to the cue point.
12 Button BPM
Sets the number of beats per minute (BPM) of a title
manually. For this press the button several times to the
beat of the music.
13 Buttons PITCH BEND + and -
The function Pitch Bend creates a temporary change of
speed. As long as the buttons are pressed, the title is
played slower or faster.
15 Buttons HOT CUE 1-3
To store and to call up to three cue points per title.
16 Pitch slide control
Sets the speed (if the button MASTER TEMPO lights up,
the tonal pitch will not be changed). Slide the control up
to decrease the pitch, slide it down to increase it. The
pitch percentage is indicated in the display.
16
Button PITCH
For selecting the pitch adjustment range. Each push of
the button switches between ±100 %, ±6 %, ±12 % and
±25 %.
31/50 00053493.DOC, Version 1.0