The "Mode" Button Functions; Sda (Special Date Alarm) - Silvercrest SWDR 500 A1 - IAN 282353 Bedienungsanleitung

The "MODE" button functions

While the device is powered off the "MODE" button (15) lets you access the
setting mode for different functions.
Press once
Press twice
Press 3 times
Press 4 times
In radio mode the "MODE" button (15) has the following functions:
Press once
Press twice

SDA (Special Date Alarm)

This function lets you program up to 10 yearly-recurring date alarms. The
procedure is as follows:
 While the device is powered off, press the "MODE" button (15) once. The
display (6) reads "SDA". 01 (for the first SDA) and the associated date in
month.day format flash. If the alarm is disabled, the "SDA" icon (25) will
also flash. While an SDA is enabled, the "SDA" icon (25) illuminates. In this
case, the "SDA" icon (25) is also shown in clock mode.
 Press the "VOL-" (12) or "VOL+" (4) buttons to set the desired date. You can
keep the buttons pressed to accelerate the digits count.
 Press the "SET/STORE" button (9) briefly to enable or disable the set SDA.
You can enable or disable each SDA independently from the others. The
setting will be saved automatically.
SDA (Special Date Alarm)
NAP timer
Stop watch
RDS time synchronisation ON/OFF
To show and change the tuning mode

FM: To show and change the "MONO"
and "AUTO-ST" settings

SW: Quick selection of the different short
wave bands
SilverCrest SWDR 500 A1
English - 25