Snooze Function; Setting Alarm With Radio Wake-Up; Sleep Timer - JGC RWE-56 Bedienungsanleitung

10360_Weltempfänger.book Seite 34 Mittwoch, 21. Februar 2007 4:55 16
6. CLOCK FUNCTIONS

Snooze function

You can pause the alarm tone for between 8 and 9 minutes each time, up to a total
of an hour.
• Press S S NOOZE. The display shows SN.

6.3. Setting alarm with radio wake-up

1. Switch the radio off with the P P OWER button.
2. Press S S LEEP. The stereo indicator and time start flashing in the display.
3. Use the H H OUR + button to set the hour and the M M IN - button to set the minutes.
Press the button briefly to move the time on by one hour or one minute; or hold
it down until the desired time is reached.
After about 4 seconds the figures stop flashing. The alarm time is set and the
stereo symbol appears.
4. The radio switches on at the set time. The Sleep function is activated – the bed
symbol appears in the display. The radio switches off after 90 minutes. If the
radio is not to switch off after 90 minutes, press S S LEEP once.
5. Press P P OWER to switch the radio off.
• NOTE:
The alarm time remains stored, so that you will be woken at the same time the
next day. If the radio is switched off, press S S LEEP to switch off the alarm function.

6.4. Sleep timer

With the Sleep function you can set the radio to switch off after a specified time (10
to 90 minutes).
• The radio is switched on.
• Press S S LEEP to switch the function on. The display shows a bed symbol and a
flashing 90. You can use the S S LEEP button to reduce the time in 10-minute steps.
After about 4 seconds the figures stop flashing. The time is set and the bed
symbol appears.
After the set time the radio switches off automatically.
• Press S S LEEP if you want to switch the function off before then.
34