Specifications - Yamaha A-S3000 Bedienungsanleitung

Specifications

POWER SECTION
• Rated Output Power
(8 Ω , 20 Hz to 20 kHz, 0.07% THD) .................. 100 W + 100 W
(4 Ω , 20 Hz to 20 kHz, 0.07% THD) .................. 150 W + 150 W
• Dynamic Power (IHF)
(8 Ω) ..................................................................... 120 W + 120 W
(6 Ω) ..................................................................... 150 W + 150 W
(4 Ω) ..................................................................... 200 W + 200 W
(2 Ω) ..................................................................... 300 W + 300 W
• Dynamic Headroom
(8 Ω) .................................................................................. 0.79 dB
• Maximum Output Power
[U.K. and Europe models only]
(1 kHz, 0.7% THD, 4 Ω)...................................... 170 W + 170 W
• Maximum Effective Output Power (JEITA)
[Taiwan, China, Korea, Asia and U.K. models only]
(1 kHz, 10% THD, 8 Ω)........................................ 130 W + 130 W
(1 kHz, 10% THD, 4 Ω)........................................ 210 W + 210 W
• IEC Output Power [U.K. and Europe models only]
(1 kHz, 0.02% THD, 8 Ω)..................................... 105 W + 105 W
• Maximum Power (JEITA)
[Taiwan, China and Asia models]
(1 kHz, 10% THD, 8 Ω)........................................ 120 W + 120 W
(1 kHz, 10% THD, 4 Ω)........................................ 190 W + 190 W
• Power Bandwidth
(MAIN L/R, 0.1% THD, 45 W, 8 Ω) .................. 10 Hz to 60 kHz
• Damping Factor
(1 kHz, 8 Ω) ..............................................................250 or higher
• Maximum Input Signal Voltage
PHONO MM (1 kHz, 0.003% THD) ........................... 50 mVrms
PHONO MC (1 kHz, 0.003% THD) ........................... 2.3 mVrms
CD, etc. (1 kHz, 0.5% THD) ......................................... 2.80 Vrms
BAL 1/BAL 2 (1 kHz, 0.5% THD)
(BYPASS) .................................................................. 2.80 Vrms
(ATT. -6 dB) .................................................................5.60 Vrms
• Rated Output Voltage/Output Impedance
REC OUT ..................................................... 200 mVrms/1.5 kΩ
PRE OUT ......................................................... 1.0 Vrms/1.5 kΩ
• Frequency Response
CD, etc. (5 Hz to 100 kHz) ............................................ +0/−3 dB
CD, etc. (20 Hz to 20 kHz) ......................................... +0/
• RIAA Equalization Deviation
PHONO MM .................................................................... ±0.5 dB
PHONO MC ..................................................................... ±0.5 dB
• Total Harmonic Distortion
PHONO MM to REC OUT
(20 Hz to 20 kHz, 1.2 Vrms) ............................................ 0.005%
PHONO MC to LINE 2 REC
(20 Hz to 20 kHz, 1.2 Vrms) .............................................. 0.02%
BAL 1/BAL 2 to SPEAKERS
(20 Hz to 20 kHz, 50 W/8 Ω) ........................................... 0.025%
CD, etc. to SPEAKERS
(20 Hz to 20 kHz, 50 W/8 Ω) ........................................... 0.025%
• Signal to Noise Ratio (IHF-A Network)
PHONO MM (5 mVrms, Input shorted) .............................. 93 dB
PHONO MC (500 µVrms, Input shorted) ........................... 85 dB
CD, etc. (200 mVrms, Input shorted) ................................. 103 dB
• Residual Noise (IHF-A Network) .................................... 33 µVrms
24
En
CONTROL SECTION
• Input Sensitivity/Input Impedance
CD, etc. ............................................................ 200 mVrms/47 kΩ
PHONO MM .................................................... 2.5 mVrms/47 kΩ
PHONO MC ....................................................... 100 µVrms/50 Ω
MAIN IN ................................................................. 1 Vrms/47 kΩ
BAL 1/BAL 2 ................................................ 200 mVrms/100 kΩ
• Headphone Jack Rated Output Power
CD, etc. (1 kHz, 32 Ω, 0.2% THD) ................... 70 mW + 70 mW
• Channel Separation
CD, etc. (Input, 5.1 kΩ Terminated, 1 kHz/10 kHz)
...................................................................... 74/54 dB or higher
PHONO MM (Input shorted, 1 kHz/10 kHz, Vol.:−30 dB)
....................................................................... 90/77 dB or higher
PHONO MC (Input shorted, 1 kHz/10 kHz, Vol.:−30 dB)
....................................................................... 66/77 dB or higher
• Tone Control Characteristics
BASS
Boost/Cut (50 Hz) ............................................................. ±9 dB
Turnover Frequency ........................................................ 350 Hz
TREBLE
Boost/Cut (20 kHz) ........................................................... ±9 dB
Turnover Frequency ....................................................... 3.5 kHz
GENERAL
• Power Supply
[U.S.A and Canada models] .............................. AC 120 V, 60 Hz
[Taiwan model] .................................................. AC 110 V, 60 Hz
[China model] .................................................... AC 220 V, 50 Hz
[Korea model] .................................................... AC 220 V, 60 Hz
[Australia model] ............................................... AC 240 V, 50 Hz
[U.K. and Europe models] ................................. AC 230 V, 50 Hz
[Asia model] ........................................ AC 220 - 240 V, 50/60 Hz
• Power Consumption
[U.S.A and Canada models] .............................................. 500 VA
[Other models] .................................................................... 350 W
• Standby Power Consumption ................................................... 0.3 W
• Dimensions (W × H × D) ............................... 435 × 180 × 464 mm
• Weight .................................................................. 24.6 kg (54.2 lbs)
* Specifications are subject to change without notice.
−
0.3 dB
(17-1/8" × 7-1/8" × 18-1/4")