Maintenance; Service Notes - DeWalt XR Li-ION DCR017 Handbuch

PROGRAMMING THE CLOCK
The time and date can be updated manually or
automatically synchronised with national time signals
broadcast over DAB (where available).
To Synchronise the Clock Automatically:
(DAB mode ONLY)
NOTE: When the radio is first used it will enter DAB
mode and automatically scan for stations.
1. Press the Menu button (e).
2. Use the arrow buttons (c) to scroll to Clock
Adjust and press the Enter/Display button (g).
3. Scroll to Sync Time Now press the Enter/
Display button to select. This automatically
synchronises clock with national time signals.
To Adjust the Clock Manually:
(FM and DAB mode)
1. Press the Menu button (e).
2. Use the arrow buttons (c) to scroll to Clock
Adjust on the LCD display and press the Enter/
Display button (g).
3. Scroll to Date & Time and press the Enter/
Display button (g).
4. Set the date and time using left and right arrow
buttons (c).
5. Once the desired time is set press the Enter/
Display (g) button to commit.
Other Clock Adjust menu options:
• Time format: Select a 12h or 24h time display
format
• Date format: Select the date display format,
MM/DD/YYYY, YYYY/MM/DD or DD/MM/YYYY.
TO ADJUST THE EQ
Sound can be adjusted by changing the equalization
of the bass or treble of the radio.
1. Press the Menu button (e) and scroll using the
left or right arrow buttons (c) to select Sound
EQ. Select by pressing the Enter/Display
button (g).
2. Press the right arrow button to increase the
bass or the left arrow button to decrease it.
3. Once desired adjustment is achieved, press the
Enter/Display button (g).
4. Repeat steps 2 and 3 for treble adjustment.
Important Radio Notes
1. The radio will run up to 8 hours on a fully
charged 4.0 amp hour battery. Using batteries
of lower voltage or capacity will result in less run
time.
2. Reception will vary depending on location and
strength of radio signal.
3. Certain generators may cause background
noise.
4. AM reception will most likely be clearer when
powered by a battery pack.
5. To use the auxiliary port (k), plug the output
®
jack from a CD or iPod */MP3 player into the
port (fig. 1). The sound from the external source
plays through the speakers of the DCR017.
6. The USB power output port (p) is a connection
port for powering low power devices such as
mobile phones, CD and MP3 players.
* iPod is a registered trademark of Apple Inc.

MAINTENANCE

Your D WALT radio has been designed to operate
E
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper care.

Service Notes

This product is not user serviceable. There are
no user serviceable parts inside the charger/
radio. Servicing at an authorised service centre is
required to avoid damage to static sensitive internal
components.
Cleaning
WARNING: Never use solvents or
other harsh chemicals for cleaning
the non-metallic parts of the charger/
radio. These chemicals may weaken
the materials used in these parts. Use
a cloth dampened only with water and
mild soap. Never let any liquid get inside
the charger/radio; never immerse any
part of the charger/radio into a liquid.
EN GL IS H
31