Fm Operation - Renkforce DB-820 Bedienungsanleitung

Operation

FM Operation

• Switch on the device with the button
• If the device is not set to FM reception yet, keep the button Info/Menu (8) pushed for a longer
time to display the menu.
• Use the button T+ (4) or T- (3) to select the entry TO FM and confirm the selection with the
button / Select (2).
Station search
• Push the button T+ (4) or T- (3) to set the desired broadcast frequency.

If you keep the button pushed for about 1 second, a station scan starts and stops
at the next station received.
• When a station has been found, it is played back and the broadcast frequency is displayed in
the bottom display line. For an RDS station, the station name will be displayed after a moment.
Saving channel
Up to 10 FM stations can be stored in the station memory.
• Select other station to be stored as described above.
• Push the button Info/Menu (8) for a longer time to display the menu.
• Use the buttons T+ (4) or T- (3) to select the entry STORE and confirm the selection with the
button / Select (2).
• The currently selected station memory slot appears at the lower right of the display.
/ Select (2).
13:44
F M
9 6 . 6 P 1
37