Radio Reception; Radio; Alarm; Setting The Alarm Time - Grundig Sonoclock 740 Handbuch

RADIO

Radio reception

The radio only functions after time adjustment.
This ensures the fastest possible time signal reception,
which is then not disturbed by the radio.
• If you wish to switch on the radio before time signals have
been received, you should first set the time manually as
described before.
• Then, switch on the radio with the ON/OFF button.
– The illuminated dial pointer led (TUNING DIAL 6). serves
as 'on' indicator.
• Tune to stations with the rotary control TUNING.
• Adjust the volume with the rotary control VOLUME
Aerials
The wire aerial at the back of the set is used for VHF (FM)
reception.
• Position the wire aerial so that optimum reception is
obtained.
NOTE:

ALARM

Alarm
• Select the required alarm time function (radio alarm or
sound signal alarm) with the switch
– If both alarm times are activated, this will be indicated by
the light dots 1 6 and

Setting the alarm time

• Press the ALARM 1 or ALARM 2 button briefly.
– The display shows the present alarm time.
• Press and hold down the ALARM 1 or ALARM 2 button
and set the alarm time with the – DOWN/+ UP buttons.
Weekend Alarm Cancellation (WEC)
• If you do not wish to be woken by the alarm on the
weekend, press WEC once.
– The WEC 6 light dot lights up.
– The alarm will function normally on the other days.
– This applies to alarm time 1 and alarm time 2.
• Press the WEC button again to switch this function off.
or .
2 6.
GB
17