Calendar Function; Clock Setting - Grundig Sonoclock 740 Handbuch

Calendar function

The Sonoclock 740 is provided with a calendar
function. The day, month and year are received from
DCF 77 or can be set manually.
GB
The week day is set automatically according to the day,
month and year.
Displaying the calendar
• Press CALENDAR once.
– The day and month appear on the display.
– After approx. 3 seconds, the display returns to the
indication of the time.
• Press CALENDAR twice.
– The year appears on the display.
– After approx. 3 seconds, the display returns to the
indication of the time.
16

CLOCK SETTING

Manual setting
(if no time signal is received)
Manual time setting
• Press and hold down the TIME button and set the quartz clock
with the – DOWN/+ UP buttons.
– If the respective button is kept pressed, time setting will first run at
low and then (after 4 seconds) at high speed.
• Release the buttons when the desired time is reached.
– The clock starts running when the buttons are released.
Manual date setting
• Press and hold down the CALENDAR button and set the date
with the – DOWN/+ UP buttons.
– If the respective button is kept pressed, date setting will first run
at low and then (after 4 seconds) at high speed.
• Release the buttons when the desired date is reached.
Manual year setting
• Press the CALENDAR button twice until the year indication
appears. With the year indication active, hold the CALENDAR
button down and set the year with the – DOWN/+ UP buttons.
– If the respective button is kept pressed, year setting will first run
at low and then (after 4 seconds) at high speed (from the year
1990 to 2099).
• Release the buttons when the desired year is reached.
– The week day indication changes automatically.