Radio Mode; General Information; Rds Information - Grundig Sonoclock 660 PLL Bedienungsanleitung

RADIO MODE

General information

Switching on and off
1
Switch on the device from standby
mode with »ON/OFF«.
2
Switch on the device to standby
mode with »ON/OFF«.
Adjusting the volume
1
Set the desired volume with »C«
(right side of the device)
Listening with headphones
or earphones
1
Insert the headphone or earphone
plug (ø 3.5 mm, stereo) into the
0
» « jack on the left of the de-
vice.
– The loudspeaker of the device is
switched off.
Caution:
Excessive sound pressure from
7
the earphones or headphones
can cause hearing loss.
Radio mode
For the best FM (UHF) reception it is
sufficient to align the wire antenna
accordingly.
Switching on
1
Switch on the device from standby
mode with »ON/OFF«.
___________________________________
Selecting preset radio
stations
1
Select the radio station with
or
Switching the display
1
In radio mode, switch the display
between the time/day and
frequency or station name with
»DISPLAY«.

RDS information

RDS (Radio Data System) is an infor-
mation system which is transmitted
additionally by most FM stations.
If the device receives an RDS station,
the station name appears briefly
in the display, for example »FAN-
TASY«, and »
constantly.
Note:
It may take some time before
7
all the RDS information is avail-
able.
Searching for RDS stations
1
Search for the desired RDS sta-
tion by pressing
repeatedly until »
pears in the display and an RDS
station is received.
+«.
»P
f
»P
f
ENGLISH 25
–«
»P
« is displayed
–« or +«
»P
« ap-