Mounting The Main And Center Speakers - Yamaha NS-P220 Bedienungsanleitung

Mounting the main and center speakers

1
2
If you want to mount a speaker on a commercially available speaker stand
(for the main/center/rear speakers)
4
E-
Mounting
bracket
(type A)
Screw
(type A)
Mounting
bracket
(type C)
Screw
(type A)
60 mm
Place the main speakers on a rack or on a shelf. Place the
center speaker on top of the TV, on a shelf or inside the TV
rack so that it is stable.
To obtain more stability and usefulness, we recommend that
you mount these speakers on the provided mounting
brackets (type A).
To mount the speakers on the mounting
brackets (type A)
1
Attach the bracket to the bottom of the speaker by using
the provided screw (type A).
2
Turn and/or slide the speaker on the bracket according
to your preference, and then tighten the screw.
Note
Though this speaker is a magnetically shielded type,
there may be some influence on a TV picture depending
on the type of TV or the placement of the speaker. In
such a case, place the speaker apart from TV so that
there is no influence on TV picture.
The provided mounting bracket (type C) with 1 pair of
screw holes (at an interval of 60 mm) can be used to
mount the speaker on a speaker stand.
* Those screw holes can be used with M4 screws only.
1
Attach the bracket to the bottom of the speaker by
using the provided screw (type A) so that the convex
part of the bracket fits in the grooved part on the
bottom of the speaker as shown on the left.
2
Mount the speaker on the speaker stand by using the
screw holes on the bracket.
Note
The mounting bracket (type C) is provided for each of 5
speakers.