Placing The Subwoofer; Placing The Front And Surround Speakers - Yamaha NS-P330 Bedienungsanleitung

Placing the Speakers

Placing the subwoofer

Placing the front and surround speakers

You can place the front and surround speakers on the floor or a rack, or attach them to a wall. Also, you can mount them on YAMAHA
speaker stands "SPS-200" or commercially available speaker stands. Please select an installation method that suits your room layout.
To place on the floor or a rack
To attach to a wall
Screws (Diameter: 3.5 to 4 mm (1/8" to
5/32"), commercially available)
110 mm
(4-1/16")
20 mm (25/32")
or more
4
Detach
Non-skid pad
110 mm
(4-1/16")
10 mm (13/32")
Attach the non-skid pads to the bottom of the subwoofer, and then
place the subwoofer on a level hard floor.
y
Using non-skid pads prevents the subwoofer from sliding when it
vibrates, and ensures quality sound production.
Attach the non-skid pads to the bottom of each speaker, and then
place them on level hard surfaces.
y
Using non-skid pads prevents the speakers from sliding when
they vibrate, and ensures quality sound production.
You can attach the speakers to a wall using commercially
available screws (Diameter: 3.5 to 4 mm (1/8" to 5/32"),
Length: 20 mm (25/32") or more). One speaker requires two
screws. To attach all speakers to a wall, you need to prepare eight
screws.
1
Install two screws in the wall where you want
to place the speaker.
2
Hang the speaker on the screws using the
holes in the back of the speaker.