Yamaha NS-F901 Bedienungsanleitung Seite 7

<
Bi-wired connections
Remove the jumper
cables before connecting.
To connect the speaker to the
output terminals of the amplifier,
two pairs of cables for each of the
woofer and the tweeter/mid-range
are used instead of standard con-
nections. This type of connection
decreases the modulation distortion
caused by electric resistance of
the cables and driving current of
the speakers. Consequently, purer
sound quality can be expected.
To utilize bi-wired connections,
remove the jumper cables from the
terminals first, and then connect the
woofer and the tweeter/mid-range
to the amplifier separately using
two pairs of cables.
>
When your amplifier has only one
set of speaker output terminals.
Amplifier
SPEAKERS
R
+ –
NS-F901 (R)
Remove the jumper
cables before connecting.
Jumper
cable
When using a banana plug
1 Tighten the terminal knob.
2
Simply insert the banana plug into the terminal.
When your amplifier has two sets
of speaker output terminals.
L
– +
NS-F901 (R)
NS-F901 (L)
Black (–)
2
Banana plug
Both SPEAKERS A and B
should be selected.
Amplifier
SPEAKERS
R
L
A
+ – – +
B
NS-F901 (L)
Tweeter/Mid-range
terminals
Red (+)
Woofer terminals
1
4
En