Miele Professional WS 5080 Gebrauchsanweisung Seite 42

Description of the machine
12 = Programme and temperature selector
switch
The programme selector switch is used
to select the required wash programme.
A
Cottons
B
Minimum iron
C
Delicates/synthetics
D
Woollens
E
Short programme
F
Separate rinse and spin*
G
Separate spin*
H
Separate drain*
r
End
13 = "Reset" button
(only on WS 5100 / WS 5140 with gas heating)
After an ignition fault wait for at least
1 minute before operating this button.
42
14 = Emergency cut-off switch
12
After re-setting, the display for "Time" or
"Temperature" will flash. The "Start" button
needs to be pressed again to continue the in-
terrupted programme.
*)
Please note
Switch settings F, G and H
These settings have also been described
elsewhere as:
F - Extra rinse and spin
G - Extra spin
H - Extra drain
The respective functions are the same.
13
14
To be operated only in an emergency.
After removing the cause of danger this
switch can be re-set by turning the
knurled disc in a clockwise direction.
M.-Nr. 04 506 754