Auxiliary Functions; Time Delaying (In Some Models); Starting The Program - Beko WMB 51420 Handbuch

Auxiliary functions

Auxiliary Function Selection Buttons
Select the required auxiliary functions before
starting the program. Furthermore, you may
also select or cancel auxiliary functions that are
suitable to the running program without pressing
the "Start/Pause" button. To select or cancel
the auxiliary functions, the machine must be at
any prior stage than the auxiliary function to be
selected or cancelled. If the auxiliary function
cannot be selected or cancelled, light of the
relevant auxiliary function will blink 3 times to
warn the user.
Some combinations cannot be selected
C
together. Ex.: Pre-wash and Quick Wash.
Warning light of the selected auxiliary
function will light up.
Auxiliary function selection
If an auxiliary function that is not compatible
with the previously selected auxiliary function
is chosen, the function selected first will be
cancelled and the last auxiliary function selection
will remain active.
Ex.: If you want to select pre-wash first and then
quick wash, pre-wash will be cancelled and
quick wash will remain active.
Auxiliary function that is not compatible with the
program cannot be selected. (see, "Program
Selection Table")
Auxiliary function buttons may differ
C
according to the model of your machine.
• Voorwas (Prewash)
A pre-wash is only worthwhile for heavily soiled
laundry. Without pre-wash you save energy,
water, detergent and time.
Pre-wash without detergent is
C
recommended for lace and curtains.
• Express Wassen (Quick Wash)
This function can be used for "Cottons" and
"Synthetics" programs. It decreases the washing
times for lightly soiled laundries and also the
number of rinsing steps.
Recommended load capacity is half of the
C
maximum load capacity of the selected
program.
• Rinse Plus
This function enables your machine to make
another rinsing in addition to the one already
made after the main wash. Thus, the risk for
sensitive skins (babies, allergic skins and etc.) to
be effected by the minimal detergent remnants
on the laundry can be reduced.
• Anti-Creasing
With this function, drum movement will be
lessened to prevent creasing and spinning speed
is limited. In addition, washing is carried out at a
higher water level.
• Rinse Hold
If you are not going to unload your clothes
immediately after the program completes, you
may use rinse hold function and keep your laundry
in the final rinsing water in order to prevent them
become wrinkled when there is no water in the
machine. Press "Start/Pause" button after this
process if you want to drain the water without
spinning. Program resumes. Your machine drains
the water and program completes.
If you want to spin your laundry that you left in
water:
- Adjust the spin speed.
- Press Start/Pause button
Program resumes. Your machine drains the water,
spins the laundry and program completes.
• Soaking
In case of selecting the auxiliary function for
soaking, your laundry will be kept in detergent
water before the washing process starts. Hence,
stains that ingrained into the laundry can be
removed better.

Time delaying (in some models)

If you wish to wash your clothes at a later time,
with the time delay function you can delay the
program start up 3 hours, 6 hours or 9 hours.
Do not use liquid detergent when you set time
delay. There is the risk of staining of the clothes.
Open the loading door, place the laundry inside
and fill detergent drawer. Set the washing
program, temperature, spin speed and, if required,
the auxiliary functions. When the time delaying
button is pressed once, a 3 hour delay is selected
and the relevant led lights. When the same button
is pressed again, 6 hours; and if pressed once
more, 9 hours delay will be selected. If the time
delaying button is pressed one more time, time
delaying function will be cancelled (all of the time
delaying lights will be off). Set the time delay as
you require. Delayed operation of the selected
program is started by pressing the "Start/Pause"
button after selecting the time delay. Previous time
delaying light turns off and next time delaying light
turns on after every 3 hours.
Laundry may be loaded/unloaded during the
C
time delay period.
Changing the delay time
Press the time delay button. The time changes
with steps of 3 hours each time you press the
button and the relevant time delaying light turns
on.
Canceling the time delay
Set the Time Delay to zero (all time delaying lights
are off) or turn the Program selection knob to any
program. Thus, the time delay will be cancelled.
The "End/Cancel" light flashes continuously.

Starting the Program

Press "Start/Pause" button to start the program.
Program follow-up lamp showing the startup of the
program will light up.
If no program is started or no button is
C
pressed within 1 minute during program
47 - EN