Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
UK:
Instruction Manual
FEATURES
Our VDB series Automatic ice makers are designed in cubic shape with the curved front panel and
curved door (or stainless steel flat front panel and flat door) for nice appearance. Many advantages of
the ice maker are available, such as ice making quickly, great ice making capacity, nice ice shape and
ice dropping quickly. Water inlet ~ water filling ~ ice making ~ water releasing and ice dropping, all
these processes are automatically controlled for ice making continuously. In case of water shortage or
ice full in cabinet, the indicator on the operation board will light on accordingly and the ice maker will
stop operation automatically. The ice storage cabinet is PU foamed, so it is insulated well and it could
prevent the ice from melting.
NOTES BEFORE OPERATION
1. The incline angle of the cabinet could not be over 45 during transportation.
Don't make ice maker upside-down in case the compressor or refrigerating
system troubles occur.
2. When use for the first time or when restart after long period of unused, the ice made for the first
two times is not edible, it is the self-cleaning process of the ice making system.
3. The ice make should be placed on horizontal and structurally sound ground and away from heat
source and corrosive gas. At least about 150mm room should be left around the ice maker to
ensure the fine ventilation.
4. Please adjust the feet when placing the ice maker somewhere, otherwise the water level will be
effected and so do the ice shape. Before using the ice maker for the first time, you should wait
about 12 hours after positioning it in a proper place.
5. The outlet of drainage tube should be lower than cabinet so as to drain water easily.
6. The separate three-pole outlet should be used and the grounding must be good.
4
Werbung
Inhaltsverzeichnis
