Philips FC8140 Bedienungsanleitung Seite 14

English
14
- Hold the filter in such a way that the pleated side points upwards and
the water flows parallel to the pleats. Hold the filter at an angle so that
the water washes away the dirt inside the pleats.
- Turn the filter 180° and let the water flow along the pleats in the
opposite direction.
- Continue this process until the filter is clean.
Never clean the HEPA filter with a brush.
Note: Cleaning does not restore the original colour of the filter, but does restore
its filtration power.
12 Remove the foam filter and rinse it under a tap.
13 Carefully shake the water from the surface of the HEPA dust
container filter. Let the HEPA dust container filter and the foam
filter dry completely before you put them back into the vacuum
cleaner.
14 Place the foam filter back in the dust container.
15 To place the HEPA dust container filter back into the dust container,
press the large lug onto the spring-loaded button, insert the small
lugs into the hinges (1) and press the latch home until it locks in
place ('click') (2).
16 Put the dust container back into the appliance.