Throttle Curve Programming; Example Curves; Gear Speed - Nine Eagles J6 Bedienungsanleitung

Normal curves can be set between -80% and +80%
5 point throttle curve
Description Steps to follow
Setup of the 5 points throttle 1. Turn on the transmitter
curve 2. Press the A-button for 1 second and the "NOR REV" symbol and "123456" symbol will start flashing.
3. turn the D-knob until only the "123456" symbol flashes.
4. Press the A-button or C-button. The active channel is displayed
5. Turn the D-knob until "dot" appears on the screen
6. Press the A-button or the C-button. The number of the corresponding dot (dot n°1 to dot n°5) will
7. Turn knob D in order to select the desired dot.
8. Press the A-button or C-button in order to set a value for this point.
9. Use knob D to set the value.
10. Press the C-button to save the change
11. Press the B-button to go back in the menu.
Examples
Description Steps to follow
Example: 1. Turn on the transmitter
Setting the elevator curve index 2. Press the A-button for 1 second and the "NOR REV" symbol and "123456" symbol will start flashing.
to +25%" 3. turn the D-knob until only the "123456" symbol flashes.
4. Press the A-button or C-button. channel 1 will now flash
5. Turn the D-knob until channel 2 appears on the screen
6. Press the A or C-button. The first two digits on the throttle indicator will flash, follow by "E"
7. Turn knob D until "+25" is displayed as value.
8. Press the C-button to save the change
9. Press the B-button to go back in the menu.
Description
Steps to follow
Example: 1. Turn on the transmitter
2. Press the A-button for 1 second and the "NOR REV" symbol and "123456" symbol will start flashing.
Setting a 5 point throttle curve 3. turn the D-knob until only the "123456" symbol flashes.
with these values: 4. Press the A-button or C-button. channel 1 will now flash
5. Turn the D-knob until channel 3 appears on the screen
dot 1: 2% Down on the screen ""dot"" is displayed."
dot 2: 28% 6. Press the A-button or the C-button. "1" (dot n°1) will flash
dot 3: 52% 7. Press the A-button or C-button. "1" (dot 1) keeps flashing. 3 digits on the throttle indicator will flash as well.
dot 4: 77% 8. Turn the D-knob until the value for dot 1 is 002
dot 5: 98%" 9. Confirm by pressing the C-button. "2" (dot 2) will start flashing.
10. Press the A-button or C-button. "2" (dot 2) keeps flashing. On the throttle indicator, 3 digits flash as well.
11. Turn the D-knob until the value for dot 2 is 028
12. Press the C-button to confirm. "3" (dot 3) will start flashing.
13. Press the A-button or C-button. "3" (dot 3) keeps flashing. On the throttle indicator, 3 digits flash
14. Turn the D-knob until the value for dot 3 is 052
15. Press the C-button to confirm. "4" (dot 4) will start flashing.
16. Press the A-button or C-button. "4" (dot 4) keeps flashing. On the throttle indicator, 3 digits flash
17. Turn the D-knob until the value for dot 4 is 077
18. Press the C-button to confirm. "5" (dot 5) will start flashing.
7. Press the A-button or C-button. "5" (dot 5) keeps flashing. 3 digits on the throttle indicator will flash
20. Set the value of dot 5 to 098 with knob D
21. Press the C-button to confirm
22. Press the B-button twice in order to go back in the menu.

Gear Speed

Description Steps to follow
There are two possibilities: Slow 1. Turn on the transmitter
and fast 2. Press the A-button for 1 second and the "NOR REV" symbol and "123456" symbol will start flashing.
3. turn the D-knob until y "G-S" flashes
4. Press the A-button or the C-button. 3 digits will now flash
5. Turn the D-knob in order to set the Gear Speed.
(press the A-button to restore the factory value)"
6. Press the C-button to save and to go to the trim memory.
7. Press the B-button to go back in the menu.
J6 transmitter
Curve index 0%
flash
(press the A-button to restore factory settings)
as well.
as well.
as well.
Stick movement
Curve index 60%
Stick movement
Curve index -60%
Instructions
The throttle curve is a five dot curve that can be
set from the minimum throttle stick position
(dot 1) to the maximum throttle stick position
(dot 5). dots 2,3,4 are in between. Dot 3 cor-
responds the middle position of the throttle stick.
values vary between 0% and 100%
Instructions
When a channel has been chosen, the throttle
indicator displays the current curve index, fol-
lowed by an ""E""
A positive value(+) means that the sensitivity
around the middle point of the control stick is
bigger and smaller at the ends.
A negative (-) curve index has an opposite
effect.
Instructions
When moving the cursor to the channel 3, it will
automatically display ""dot"" on the LCD.
This means that the Throttle curve is a 5 dot
operation curve, and thus can be set on 5 dif-
ferent dots.
Please remark that after setup, no ""E"" will
appear on the throttle indicator.
Instructions
Use switch SW(C) in order to choose between
fast and slow gear speed.
copyright © 2012 BMI
Stick movement
5