Inhaltsverzeichnis; Lcd Screen; Technical Specifications Of The Transmitter; Lcd Instructions - Nine Eagles J6 Bedienungsanleitung

Instructions J6
Summarie
Technical specifications of the transmitter .............2
LCD Instructions...................................................2
Programming the transmitter ................................3
Wing model Programming ...................................3
Servo reverse function ..........................................3
Dual rate function ................................................4
Wing mixers .........................................................4
Curve programming ..............................................4
Throttle curve programming ..................................5
Example curves ....................................................5
Gear Speed .........................................................5
Trims programming ..............................................6
Helicopter programming .......................................6
Model type Setup .................................................6
6-Channel Radio Control System 2,4 Ghz
1. This transmitter is included with the 3D models Solo Pro 100-3D, Solo Pro 125-3D and 180-3D (Excepted B&F sets)
2. Programmable mixing set up, curve settings, etc.
3. Large LCD screen with display of all the functions and programs.
4. Programmable functions to adjust flying parameter for helicopters (CCPM) and airplanes
5. Integrated advanced 2.4GHz DSSS technology, it can achieve long communication distance, excellent anti-interference and strong errors correct-
ing features.
6. User-friendly interface for easy operation, with simple and practical functions
7. Convenient switch for Mode 1 and Mode 2, switching both the mechanics and the electronics
8. With simulator connector. (mini Din).
LED indicator
VR(A): Hov. T/Trim Flap
SW(B): 3D/ LG
SW(A): Throttle hold/
flaps switch
On/Off switch
A-button
B-button
Remark: the functions of the switches may differ, depending the model.
Functions described before the "/" are for helicopter, functions described after the "/" are for aero planes.
The following function buttons are frequently used.
A: Enter/ factory setting
B: Return
C: Confirm/ next step
D: Adjust values.

LCD screen

The high resolution LCD screen functions are used as interface for programming the transmitter.
servo reverse function
Air-
plane
Helicopter
Throttle indicator
Trim indicator
2
copyright © 2012 BMI
Swash plate .........................................................6
Servo Inversion ....................................................6
CCPM Mixing ........................................................7
Dual rate programming .........................................7
Wing mixers .........................................................7
Curve programming ..............................................7
Throttle curve programming ..................................8
Example curve .....................................................8
Gyro Sensitivity ....................................................8
Programmation des trims ......................................9
Trim Programming ................................................9
Other functions ....................................................9
Transmitter ..........................................................9
LED indicator
SW(C): Gyro/gear Speed switch
SW(E): Trainer switch
SW(D): D/R switch
C-button: press-button
D-Button: dial
Channels
auxiliary channel
Battery Indicator
Mode1/Mode2
D/R indicator
CH5 indi-
Mixer indicator
Swash plate indicator
- CCPM 90°
- CCPM 120°
Copy function .......................................................9
3D switch protection .............................................9
Throttle Hold protection ........................................9
Binding ................................................................9
Mode1 / Mode 2 Switch ........................................8
Power Saving .......................................................10
Communication protocol .......................................10
Stick calibration ....................................................10
Reset Function ....................................................10
Trainer system .....................................................10
Factory settings ....................................................10
Receiver ..............................................................10
Mode switch
Simulator port
Technical specifications
1. battery type : 8x AA 1.5V
2. Operating Voltage: 8.5V~13V
3. Current: 200-250mA
4. Emitted Power: +14dBm
J6 transmitter