Using The Sleep Timer - Yamaha RX-797 Bedienungsanleitung

Using the sleep timer

Use this feature to automatically set this unit to the
standby mode after a certain amount of time. The sleep
timer is useful when you are going to sleep while this unit
is playing or recording a source. The sleep timer also
automatically turns off any external components
connected to the AC OUTLET(S).
POWER POWER
TV
CD MD/TAPE
1 DVD DTV/CBL
REC
DISC SKIP
FREQ/TEXT
MODE PTY SEEK
TV VOL TV CH
Notes
• The sleep timer can only be set with the remote control.
• The sleep timer automatically turns off Zone 2. However, the
power of Zone 2 components are not turned off.
1
Press one of the input selector buttons on
the remote control to select an input source.
POWER POWER
TV
CD MD/TAPE
DVD DTV/CBL
2
Start playback on the selected input source.
3
Press SLEEP repeatedly to set the amount of
time before this unit is set to the standby
mode.
Each time you press SLEEP, the front panel display
changes as shown below.
SLEEP
SLEEP 120 min
SLEEP OFF SLEEP 30 min
The SLEEP indicator flashes while switching the
amount of time for the sleep timer.
STANDBY POWER
AV
TUNER
VCR PHONO
CODE SET SPEAKERS
A
B
EON 3
SLEEP
START
VOLUME
STANDBY POWER
AV
TUNER
VCR PHONO
SLEEP 90 min
SLEEP 60 min
SLEEP
4
Press SLEEP repeatedly so that SLEEP OFF
appears in the front panel display.
SLEEP
After a few seconds, SLEEP OFF disappears from the
front panel display, and the SLEEP indicator turns
off.
y
The sleep timer setting can also be canceled by pressing
STANDBY on the remote control (or MAIN ZONE ON/OFF or
MASTER ON/OFF on the front panel) to set this unit to the
standby mode.
PLAYING AND RECORDING
21