Receiving Radio Data System Information (Fm Stations Only) - Yamaha T-D500 Bedienungsanleitung

■ Clearing the preset FM or AM station
Follow the steps below to clear a preset FM or AM station
one at a time.
1
Select the desired preset number.
See "Recalling preset stations" on page 12.
2
Press CLEAR.
The selected preset number blinks on the front panel
display.
Note
If you do not perform the next operation within 10 seconds,
the clearing is canceled.
3
Press CLEAR to confirm.
"CHXX cleared" (XX indicates the preset number) is
displayed on the front panel display.
y
• To clear all preset FM or AM stations, press and hold CLEAR
for more than 3 seconds.
• You can also clear all preset FM or AM stations, by using the
FM/AM functions. See "Presets Clear" on page 15.
Receiving Radio Data System
information (FM stations only)
Radio Data System is a data transmission system used by
FM stations in many countries. This unit can receive four
types of Radio Data System data information: Program
Service, Program Type, Radio Text, and Clock Time.
INFO/TEXT
INFO/TEXT
1
Tune into the desired Radio Data System
broadcasting station.
2
Press INFO/TEXT repeatedly to select the
desired Radio Data System display mode.
Choice
PROGRAM SERVICE Default setting. This unit
displays the name of the Radio
Data System program currently
being received.
PROGRAM TYPE This unit displays the type of
the Radio Data System
program currently being
received.
RADIO TEXT This unit displays the
information on the Radio Data
System program currently
being received.
CLOCK TIME This unit displays the current
time.
When you select "PROGRAM TYPE", the following
program type names are displayed.
FM/AM TUNING
Description
13
En