Using The Dab Functions; Station Order - Yamaha T-D500 Bedienungsanleitung

DAB TUNING
■ Clearing the preset DAB station
Follow the steps below to clear a preset DAB station one
at a time.
1
Select the desired preset number.
See "Recalling the preset DAB stations" on page 7.
2
Press CLEAR.
The selected preset number blinks on the front panel
display.
Note
If you do not perform the next operation within 10 seconds,
the clearing is canceled.
3
Press CLEAR again to confirm.
"CHXX cleared" (XX indicates the preset number) is
displayed on the front panel display.
y
• To clear all preset DAB stations, press and hold CLEAR
for more than 3 seconds. After all preset DAB stations are
cleared, the Autoscan Full function starts automatically
(see page 6).
• You can also clear all preset DAB stations by using the
DAB functions. See "DAB Clear" on page 9.
8
En

Using the DAB functions

Use this feature to set the DAB functions.
BAND
B / C / D / E
/ENTER
1
Press BAND repeatedly to select DAB as the
reception band.
2
Press FUNCTION.
The DAB function menu is displayed on the front
panel display.
3
Press B / C to select the desired DAB
function and then press E or ENTER.
You can select the following functions.
• Station Order (see page 8)
• Tune Aid (see page 9)
• Dynamic Range (see page 9)
• DAB Clear (see page 9)
• Auto Power Down (see page 9)
y
To exit from the DAB function menu, press FUNCTION again or
press D.

■ Station Order

You can change the order of the registered DAB stations.
1
Select "Station Order" in the DAB function
menu.
FUNCTION