Herunterladen Inhalt Inhalt Diese Seite drucken

Operations; Dab Tuning; Preparing The Dab Tuning - Yamaha T-D500 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für T-D500:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 42

OPERATIONS

DAB (Digital Audio Broadcasting) uses digital signals for
clearer sound and more stable reception compared to
analog signals.
DAB is broadcasted in blocks of data called "ensembles"
containing up to several radio stations that are
simultaneously broadcasted.
DAB can also include an extensive amount of text
information - called DLS (Dynamic Label Segment, see
page 10) - which is displayed on the front panel display of
the unit, enabling you to select a station by name.
DAB+ is a standard for digital radio broadcasts that uses
the MPEG4 HE-AAC v2 audio format and provides
higher quality sound than DAB.
Notes
• Be sure to check the DAB coverage in your area in that not all
areas are currently being covered. For a list of nationwide DAB
statuses and worldwide DAB frequencies, check WorldDMB
online at http://www.worlddab.org/.
• The sound quality and station information are controlled by the
DAB broadcaster, not this unit. Not all DAB broadcasters
transmit station information.
• DAB signals are broadcast in Band III (174 - 240 MHz) and
L Band (1452 - 1492 MHz).

DAB TUNING

Preparing the DAB tuning

Before tuning into DAB stations, you must perform the
automatic scanning. The scanning starts automatically
when you select DAB as the input source for the first time.
Press BAND repeatedly to select DAB as the
reception band.
The scanning starts automatically.
The number of channels found is displayed on the front
panel display.
Once the scanning is complete, this unit is tuned into the
first DAB station in the registry list.
If the automatic scanning operation is not
successful...
"No stations Available" and then following is
displayed on the front panel display.
1
Press B / C to select "Tune Aid" or
"Autoscan".
2
Press E or ENTER.
The selected function ("Tune Aid" or "Autoscan")
starts.
y
• For details on the Tune Aid function, see page 9.
• For details on the Autoscan Full function, see page 6.
• For further details about problems and their remedies, see
page 16.
AUTO SCAN
BAND
AUTO SCAN
BAND
5
En

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis