Safety Instructions - AEG KD92903E Gebrauchsanweisung

SAFETY INSTRUCTIONS

Warning! Before connecting the appliance compare the power data (voltage and
frequency) indicated on the characteristics plate with those of the power supply in
question. If these data do not match there may be problems. In case of doubt, contact an
electrician.
Warning! If the electrical wire plug is removed, the appliance must be installed and
connected by a technician. Contact a qualified electrician who knows and respects
current safety standards. The manufacturer cannot be held responsible for damage
resulting from fitting or connecting errors.
Warning! The electrical safety of the appliance can only be guaranteed if it is earthed.
The manufacturer cannot be held responsible for damage resulting from the absence of
Warning! Only use the appliance once it has been fitted into its built-in position. Only in
this manner can it be guaranteed that users cannot access the electrical components.
Warning!
conducting parts or changes to electrical or mechanical components may represent a
Warning! Repairs and maintenance, especially of parts carrying electrical current, must
only be done by technicians authorised by the manufacturer. The manufacturer and
retailers do not accept responsibility for any damage caused to people, animals or
property as a result of repairs and maintenance carried out by non-authorised personnel.
Warning! Repairs undertaken during the guarantee period must only be done by
technicians authorised by the manufacturer. If this is not the case then any damage
resulting from the repair in question is excluded from the guarantee.
Warning! The appliance must be disconnected from the electrical current when
installation and repair work is being done. To disconnect the appliance from the current,
one of the following conditions must apply:
The switchboard fuses / circuit breakers must be disconnected.
The plug should be removed from the socket. To remove the plug from the
socket do not pull on the electric cable but rather pull out the plug itself directly.
Safety instructions
6