Safety Instructions - AEG KD91405M Gebrauchsanweisung

5 ENGLISH
for the electric connection, then it must be
accessible after installation.
 The connection should include correct earthing,
in compliance with current norms.
 Disconnect the appliance from the power supply
before carrying out any maintenance operation.

SAFETY INSTRUCTIONS

WARNING!
Before connecting the appliance
compare the power data (voltage and
frequency) indicated on the
characteristics plate with those of the
power supply in question. If these data
do not match there may be problems.
In case of doubt, contact an
electrician.
WARNING!
If the electrical wire plug is removed,
the appliance must be installed and
connected by a technician. Contact a
qualified electrician who knows and
respects current safety standards. The
manufacturer cannot be held
responsible for damage resulting from
fitting or connecting errors.
WARNING!
The electrical safety of the appliance
can only be guaranteed if it is earthed.
The manufacturer cannot be held
responsible for damage resulting from
the absence of or defects in the
installation's protection system (e.g.
electrical shock).
WARNING
!
Only use the appliance once it has
been fitted into its built-in position.
Only in this manner can it be
guaranteed that users cannot access
the electrical components.
WARNING
!
Never open up the appliance's frame.
Possible contacts with electrical
conducting parts or changes to
electrical or mechanical components
may represent a danger to users'
safety and prejudice the correct
working of the appliance.
WARNING
!
Repairs and maintenance, especially
of parts carrying electrical current,
must only be done by technicians
authorised by the manufacturer. The
manufacturer and retailers do not
accept responsibility for any damaged
caused to people, animals or property
as a result of repairs and maintenance
carried out by non-authorised
personnel.