Charging From The Wall - GOAL ZERO yeti 400 Lithium Benutzerhandbuch

Charging from the Wall

Using the included AC Wall Charger, plug your Goal Zero Yeti into any wall outlet. You will
know the Goal Zero Yeti is charging when the blue LED light next to the INPUT port turns
on, and battery segments in the BATTERY DISPLAY are blinking. The Goal Zero Yeti is
fully charged when all battery segments stop blinking and remain solid. The Goal Zero
Yeti should recharge from the wall in about 7 hours.
1. The AC wall adapter comes in two pieces. Connect the two pieces by plugging the
cable into the box.
2. The AC cable can be plugged into the AC adapter while it's stored inside the storage
compartment with the 8mm DC barrel connector plugged into the port inside the
compartment, or it can be moved out of the compartment and plugged into the front
panel input port.
Charging from your Car
Although not recommended, you can charge your Goal Zero Yeti 400 from any 12V
source, like your car, to charge your Goal Zero Yeti from a car or 12V source, you will
need to purchase an 8.0 mm to 12V charger from GoalZero.com. Call our Customer
Solutions Center at 1-888-794-6250 for help identifying the charger. Since car battery
systems are designed for charging Lead Acid battery chemistries, and your Goal Zero
Yeti is a Lithium Ion battery system, the charge rates and how completely the Goal Zero
Yeti will get charged may be inconsistent.
5