Before First Use; Daily Use; Loading The Laundry - AEG LP5681 Benutzerhandbuch

18 www.aeg.com
To deactivate/activate the acoustic
signals, touch the
simultaneously for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
8.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a new
programme.

9. BEFORE FIRST USE

1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Pour a small quantity of detergent
into the compartment marked

10. DAILY USE

WARNING!
Refer to Safety chapters.
10.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the Ein /Aus button for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
programme dial is automatically set on
Cotton programme .

10.2 Loading the laundry

1. Open the appliance door.
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry
in the drum.
4. Close the door firmly.
and the buttons
.
• To activate/deactivate this option
touch the button and the
button simultaneously until relevant
indicator comes on/goes off on
display.
4. Set and start a programme for cotton
at the highest temperature without
any laundry in the drum.
This removes all possible dirt from the
drum and the tub.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.