Philips Senseo HD7858 Benutzerhandbuch Seite 10

• The 1-cup symbol starts to flash.
Press one of the following buttons to change
6
the coffee volume: the regular coffee button
for a larger cup, the milk only button for a
medium cup (default setting) or the strong
coffee button for a smaller cup (Fig. 24).
• The appliance beeps three times to confirm
and starts to brew a coffee recipe according
to the new setting.
The appliance saves the setting automatically.
8 Cleaning
Regular cleaning of your SENSEO
to ensure that the SENSEO
optimally and to optimise the lifetime of the
coffee machine.
Warning:
B
Never immerse the SENSEO
water.
8.1 Cleaning the milk spout
For a reliable performance of the milk spout
and consistently good frothing results, it is
important to clean the milk spout and milk tube
regularly and thoroughly. The milk spout can be
disassembled completely, which allows you to
remove all milk residues from it.
Note:
D
If you do not plan to froth milk again straight
away, rinse the milk spout and milk tube within 30
minutes after use.
Note:
D
After the last use of the day, clean the milk spout
and milk tube thoroughly.
8.1.1 Rinsing after every use
Put the milk tube in a cup of clean water (Fig. 25).
1
Place an empty cup under the spout (Fig. 26).
2
Press the milk only button (Fig. 27).
3
The machine rinses all milk residues from the
milk spout and milk tube with clean hot water.
10
is important
®
coffee always tastes
®
coffee machine in
®
8.1.2 After the last use of the day
Clean the milk tube and the milk spout in the
dishwasher or in hot water with some washing-up
liquid.
Note:
D
Cleaning in the dishwasher is recommended.
Pull the milk tube out of the milk
1
spout (Fig. 28).
To remove the milk spout from the machine,
2
pull it towards you (Fig. 29).
Remove the top part of the milk spout from
3
the bottom part by pulling it firmly. (Fig. 30)
Take out the frothing system (Fig. 31).
4
Open the spring to separate the
5
parts (Fig. 32).
Remove the inside part of the frothing system
6
by pulling it downwards (Fig. 33).
Remove the small lid by pulling it
7
upwards (Fig. 34).
Clean all parts in the dishwasher or with hot
8
water and some washing-up liquid (Fig. 35).
8.1.3 Reassembling the milk spout
Place the small lid back on the frothing
1
system (Fig. 36).
Place the inside part back into the frothing
2
system (Fig. 37).
Close the spring to lock the two parts
3
together (Fig. 38).
Place the frothing system in the bottom part
4
of the milk spout (Fig. 39).
Place the top part of the milk spout back
5
onto the bottom part (Fig. 40).
8.2 Cleaning the coffee spout
and the machine
Always unplug the machine before you clean it.
1
To remove the coffee spout from the
2
machine, pull it towards you (Fig. 41).
Remove the top part of the coffee spout from
3
the bottom part by pulling it firmly (Fig. 42).
Clean the outside of the machine with a moist
4
cloth.
Clean the water distribution disc and the
5
rubber sealing ring with a moist cloth.