Set Time - Avanit SXHD Bedienungsanleitung

5.7 Set Time

Reasonable operation of the AVANIT SXHD require setting of system time. By de-
fault, the receiver is set to GMT
ceived signal. Time zone is set to GMT + 1 hour (+ 1:00) by default. Required changes
can be made in the sub-menu Time:
1. Select the menu System Setup (see above).
2. Select the sub-menu Time and confirm by pressing OK.
3. Select the item GMT Usage and switch on or off GMT Usage by using the keys
/ or /
On = automatic time setting via satellite signal is activated.
Off = automatic time setting via satellite signal is deactivated.
)
4. Select the item GMT and select your time zone by using the keys /
/ ; for example, the time zone of Germany, Austria and Switzerland is GMT
+1:00.
5. Select the item Summer Time and switch Summer Time Off or On by using the
keys / or /
)
¾ Please verify the presetting and correct them, if required. Please
6. If automatic time setting (GMT Usage) is switched off, then date and time should
be manually entered:
For this, select the item Date, select the position to be changed by using the keys
/ or /
select the item Time, select the position to be changed by using the keys /
or /
7. Leave the menu by pressing EXIT until the screen shows the TV picture.
4
GMT = Greenwich Mean Time
AVANIT SXHD
4
Usage, i.e. date and time are taken from the re-
.
It's recommended to keep the presetting
(GMT Usage On).
.
also consider corresponding change of those settings.
, and enter the current date by using the numeric keys. Then,
, and enter the current time by using the numeric keys.
Basic Operation
or
95