Multi Satellite; Menu System Setup; Tv System - Avanit SXHD Bedienungsanleitung

6.2.5

Multi Satellite

Multi Satellite differs from Single Satellite by the fact that all satellites marked in
the satellite list are scanned for receivable channels.

6.3 Menu System Setup

6.3.1

TV System

Here you can make several settings to the signal format at the audio and video outs.
¾ In the menu System Setup, select the sub-menu TV System and confirm by
pressing OK.
1. Select the Video Resolution.
2. Press OK to display a list with the selectable values.
3. Select the value appropriate to your TV set by using the keys
/ PR-.
Example: If your TV set is capable of displaying a resolution of 720p
should also set 720p at the receiver (720p is the factory setting).
)
In addition to the setting menu, the video resolution can be
changed directly via the remote control:
)
¾ Press (several times, if necessary) the green function key to
switch the resolution of the video signal at the HDMI output.
The set value is shown in the display.
¾ Select Aspect Mode to set the aspect ratio by using the keys /
/ .
11
p = progressive scan: progressive scan images are transmitted, e.g. 720p means that 50 progressive
scan images with a resolution of 1280 pixel/line and 720 lines/image are transmitted per second.
i = interlaced video: odd and even lines are transmitted alternatingly.
AVANIT SXHD
If receiver and your TV set are connected via a SCART cable,
then max. resolution is 576i (PAL format).
Extended Settings and Functions
/ PR+ and
11
and
then you
117