Other; Raps System - Avanit SXHD Bedienungsanleitung

6.3.3

Other

¾ Select LNB Spannung, to switch on /off the LNB supply voltage at LNB IN us-
ing the keys /
)
¾ Select Auto Standby to switch on or switch off the automatic standby function,
using the keys /
6.3.4

RAPS System

The window RAPS System displays at
Last changes from the date of the
RAPS file on the receiver.
¾ Select RAPS Mode to determine if the channel list should be completely recreat-
ed or only be updated after resetting to factory settings.
¾ Select Auto RAPS Scan to determine if the automatic update function should be
activated.
¾ Select Start to manually start new configuration or updating.
AVANIT SXHD
und /
Based on new EC regulations, this receiver is equipped with an
energy saving system. After three hours, the receiver will auto-
matically switch to energy save mode (energy consumption of
less than 1 W) unless a function is triggered via remote control
during such period (e.g. volume change or switching of chan-
nels). You can deactivate the automatic standby function via
the menu.
and /
Extended Settings and Functions
.
(factory setting is Auto Standby On).
119