Menu Tools; Software Version; Factory Settings; Display Setting - Avanit SXHD Bedienungsanleitung

Extended Settings and Functions

6.4 Menu Tools

6.4.1

Software Version

The sub-menu Information displays the current version number of the AVANIT
SXHD software.
6.4.2

Factory Settings

If you erroneously saved wrong settings or if you want to pass on the receiver with-
out your settings, then you can reset the receiver to the factory settings (reset):
To reset the receiver:
1. In the menu Tools, select the sub-menu Factory Settings.
2. Press the OK key.
You will be asked if you want to reset the receiver and delete individual settings.
3. Select Yes or No by using the keys /
After resetting your receiver, the language selection menu will be displayed.
6.4.3

Display Setting

This sub-menu can be used to edit various display settings:
¾ Select Brightness to change the brightness value from 0 to 100 (default value is
50) by using the keys /
¾ Select Contrast to change the contrast value from 0 to 100 (default value is 50)
by using the keys /
¾ Select Saturation to change the saturation value from 0 to 100 (default value is
50) by using the keys /
¾ Select Hue to change the hue value from 0 to 100 (default value is 50) by using
the keys /
¾ Select Sharpness to change the sharpness value from 0 to 10 (default value is 5)
by using the keys /
6.4.4

Update of the Receiver Software

There are two possibilities to update your receiver:
120
and /
and /
and /
and / .
and /
und / , and then press OK.
.
.
.
.
AVANIT SXHD