Anhang 1 Menüstruktur - Furuno GP-170 Benutzerhandbuch

ANHANG 1 MENÜSTRUKTUR
Note: If setting invalid data in numerical entry, two beeps sound. Reenter the correct data.
1 Display
├
Back Ground (White , Black)
├
Grid (DeepPink, GreenYellow, Green , Cyan, Purple, Blue, White/Black, Off)
├ ├
Lines Color Lines Color
│ ├
XTL Line (DeepPink, GreenYellow, Green, Cyan , Purple, Blue, White/Black, Off)
│ ├
Heading Line (DeepPink, GreenYellow, Green, Cyan , Purple, Blue, White/Black, Off)
│ ├
Course Vector (DeepPink, GreenYellow, Green, Cyan, Purple , Blue, White/Black, Off)
│ └
Course Vector Time (10 min , 20 min, 30 min, 1 H, 2 H, 3 H, 5 H, 6 H, Continuous)
├
Time Mark (DeepPink, GreenYellow, Green, Cyan, Purple, Blue, White/Black, Off )
├
Mark/WPT Name (On (All) , On (WPT), Off)
├
Cursor Size (Large , Small)
├ ├
Manual Calculation (Open the setting window ) Manual Calculation (Open the setting window.)
├
Set/Drift AVR (Off , 10 min, 20 min, 30 min, 1 H, 2 H, 3 H, 5 H, 6 H)
├
Display Select
│ ├
Main*
│ ├
Integrity*
│ ├
Highway (On , Off)
│ ├
Course (On , Off)
│ │ └
Data (On , Off) (
└
Data Overlay
└
Weather (Type16) (On, Off )
2 Track/Mark
├
Track REC (Time, Distance )
├
Track Color (DeepPink, GreenYellow, Green, Cyan, Purple, Blue, White/Black )
├
Mark Shape
├ ├
Mark Color (DeepPink, GreenYellow, Green, Cyan, Purple, Blue, White/Black ) Mark Color (DeepPink, GreenYellow, Green, Cyan, Purple, Blue, White/Black )
├
Mark Line (None , Solid, Dash, Alternate Dash)
├
Line Color (DeepPink, GreenYellow, Green, Cyan, Purple, Blue, White/Black )
├
Event Mark (Same as Mark Shape.)
├
Event Color (DeepPink, GreenYellow, Green, Cyan, Purple, Blue, White/Black )
└
Erase Track
├
Erase Track (Yes, No )
└
Erase Mark (Yes, No )
3 Navigation
├
Mark Registration (Open the mark list.)
├
Route Registration (Open the route list.)
├
Display ETA/TTG (Off , ETA, ETA+TTG)
├
ECDIS Sync
│ ├
Mode (Off , On)
│ ├
ECDIS IP ADR (Open the entry window.)
│ │ └ └
ECDIS SFI (Open the entry window.) ECDIS SFI (O
├
Goto (Mark Number) (Open the entry window.)
├
Goto (Route Number) (Open the entry window.)
└
Goto Cancel
4 Notice Setting
├
Arrival/Anchor (Arrival, Anchor, Off )
├
XTE (Off , On)
├ ├
Ship Speed
│ ├
Status (Off , In, Out)
│ └
Speed (Open the setting window.)
1
Bold Italic : Default
1
*1: Can not be changed.
(On )
1
(On )
, )
th t i d )
: Default
AP-1 AP-1